A - Cam-Slide Kit includes:- Track, Track supports, Carriage with 1/4” Screw, Three 1/4” to 3/8” Stepping Bushes, and a Ball Levelling Head.
B - Picture shows the track mounted directly onto the legs of a tripod and the camera mounted to the supplied ball levelling head on the carriage.
C- Picture shows the track mounted directly onto the legs of a tripod and the camera mounted to a pan and tilt video head which has been fastened to the carriage.
D - Picture shows the track mounted on top of the tripod's video head and the camera mounted directly to the carriage, this enables you to tilt the camera up or down as you track along the slide.
E - Picture shows the track mounted directly to the half ball of a pro tripod.
You will find on most tripods the head can be removed from the legs leaving either a 1/4" or 3/8" stud on top of the legs. This enables the track to be mounted directly onto the tripod legs.

The Cam-Slide is quick and simple to set up, it can be mounted to any sturdy tripod or placed on a table or the floor for low shots. The carriage is supplied with a Ball Levelling Head to mount the camera on, or if preferred you can use your own head from your tripod. Both 1/4” and 3/8” threaded heads can be attached to the carriage, or you can mount the camera directly onto the carriage.

Once the camera is mounted onto the carriage you can create supper smooth tracking shots as you slide the carriage down the track.

The track is 1metre long and can be supported in various ways, there are 3/8” threaded mounting holes in each end, and one in the centre of the track to mount it directly to a tripod or across two tripods. Two 1/4" to 3/8" stepping bushes are supplied should the tripod have a 1/4" stud.
Two track supports are also supplied for each end of the track, these support the Cam-Slide when it is used on a table or the floor and also prevent the carriage from coming off the end of the track.
Suitable for all camcorders and cameras up to 2.5kg.

The double rail track is made from hard anodized aluminium and the carriage has low wear, low friction bearings that do not require lubrication. It is resistant to dirt and dust.

Track:- Length 1000mm. Width 50mm. End Supports:- Width 205 x 38mm. Carriage:- Length 100mm. Width 72mm. Total Weight:- 1.5kg.

PLEASE NOTE THAT THE FOOTAGE CAPTURED FROM THIS DOLLY IS EXTREMELY SMOOTH AND ANY JERKINESS OR PICTURE BREAK UP IN THE VIDEO BELOW IS DUE TO THE INTERNET PLAYING QUALITY OF THE VIDEO AND NOT THE CAMERA FOOTAGE PRODUCED.



CUSTOMER VIDEO USING HAGUE CAMSLIDE BELOW www.mattglen.com



SPECIAL OFFER PRICE - SAVE £18.00.

Price: £155.00 (£186.00 Including VAT at 20%)

Quantity:  



Related products: