HAGUE MULTI-MOUNT SYSTEM KIT 2

THE FOLLOWING ITEMS ARE INCLUDED IN THE HAGUE MULTI-MOUNT SYSTEM KIT 2

1 X RC - ROD CLAMP
1 X R1000 - 1000mm CONNECTING RODS
2 X R500 - 500mm CONNECTING RODS
2 X R250 - 250mm CONNECTING RODS
2 X R125 - 125mm CONNECTING RODS
1 X CC - CONNECTING COLLAR
3 X SCS - CONNECTING STUD
1 X BM100 - 100mm BOWL MOUNT
1 X SR - STEPPER RING
3 X SC - SUPERCLAMP
6 X AB58 - ANGLE BRACKET

The Multi-Mount System enables a variety of interchangeable components from Hague and Manfrotto to be used in various ways to mount a camera in difficult positions, such as on vehicles, roll bars, scaffolding towers, railings, windows etc. The systems have a 100mm Bowl Mount or a Head Mount, these are held in position by using Connecting Rods, Angle Brackets, Double Ball Brackets, Rod Clamps, Connecting Collars, Superclamps and Suction Pads. The Multi-Mount System is available as 3 different kits or all the parts are available as separate items. All the components have either a 5/8" / 16mm socket or stud and are joined together with Connecting Rods of various lengths, which can be joined together to form a ridged platform to mount the camera on.

Each Multi-Mount Kit has been designed to include different items so that you have a choice of kit depending on your requirements the flexibility you require from your kit. If you then decide at a later date you require extra items these can be purchased individually.

The following items are all compatible with the Hague MMS Multi-Mount and are shown on the picture above. Please note that all of these items are available to purchase as individual items and that the items included in each kit do vary.
NOT ALL ITEMS ARE INCLUDED IN EACH KIT.

A - Rod Clamp, Product Code RC
The Rod Clamp enables two connecting rods to be held together to either adjust the length of the two rods or change direction or to brace across the rods.
B - Connecting Rods Product Codes R1000, R500, R250 or R125
The Connecting Rods are available at 4 different lengths from 125mm, 250mm, 500mm and 1000mm.
C - Connecting Collar, Product Code CC
The Connecting Collar enables two 5/8" / 16mm male studs to be held together, such as holding two connecting rods together.
D - Connecting Stud, Product Code CS
The Connecting Stud enables the Angle Bracket to fastened to a Superclamp.
E - Suction Mount, Product Code 241
The Suction Mount has a ball leveller with a 5/8" / 16mm female socket that holds the Connecting Rods.
F - Head Mount, Product Code HM38
The Head Mount is a triangle plate with a 3/8" threaded stud to attach a *Ball Levelling Head, *Pan & Tilt Head or a *Quick Release Adapter ( *sold separately ). At the corners of the triangle plate are 5/8" / 16mm male studs to attach the Angle Bracket.
G - 100mm Bowl Mount, Product Code BM100
The 100mm Bowl Mount enables a *Pro-Pan & Tilt Head with a 100mm claw ball ( *sold separately ) to be fastened to the mount and has the facility to "level off" the head. At the corners of the triangle plate are 5/8" / 16mm male studs to attach the Angle Bracket.
H - Stepper Ring, Product Code SR
The Stepper Ring enables a Pan & Tilt Head with a 75mm levelling system to be used on the 100mm Bowl Mount.
I - Superclamp, Product Code SC
The Superclamp can be attached to any pole, tube, bench or table. Its jaws will attach to a pole between 12 to 55mm in width or table edge between 12 to 30mm. It can be fixed either vertically or horizontally and has a 16mm / 5/8" female socket.
J - Angle Bracket, Product Code AB58
The Angle Bracket has two 5/8" 16mm female sockets with locking handle. It is used to connect the rods to the triangle mount.

THE FOLLOWING ITEMS ARE INCLUDED IN THE HAGUE MULTI-MOUNT SYSTEM KIT 2

1 X RC - ROD CLAMP
1 X R1000 - 1000mm CONNECTING RODS
2 X R500 - 500mm CONNECTING RODS
2 X R250 - 250mm CONNECTING RODS
2 X R125 - 125mm CONNECTING RODS
1 X CC - CONNECTING COLLAR
3 X SCS - CONNECTING STUD
1 X BM100 - 100mm BOWL MOUNT
1 X SR - STEPPER RING
3 X SC - SUPERCLAMP
6 X AB58 - ANGLE BRACKET


Price: £351.00 (£421.20 Including VAT at 20%)

Quantity: