THE TELESCOPIC STAND is easy to use, lightweight and quick to set up, and supports your camera up to 7.3m (24 ft.) high.

The telescopic stand has a minimum height of 190cm and a maximum height of 730cm. It is supplied with a remote pan and tilt power head, extension cable and pan and tilt controller. It is ideal for Canon or Nikon DSLR's cameras. The Inspire LiveView Remote Control features a built-in, 3.5” colour LCD on the hand-held transmitter that displays a LiveView image of the DSLR's picture.

APPLICATIONS

Outdoor: As compared with the traditional view, the result is completely different and the image is greatly improved when taken from a higher view point.
It is recommended that you use guide ropes (not supplied) when used outside in windy conditions to stabilize the stand and prevent swaying.

Indoor: Sometimes you may have to take a picture of a detail that is in an awkward position; it may be too high with bad lighting conditions. The traditional tripod is not high enough and, in some places, heavy duty scaffolding is forbidden.

Remote Pan & Tilt Power Head
The electronic motorized Pan & Tilt Power Head fastens to the stand by an adaptor with a 1/4" stud.
The unit is battery operated with a wired remote control for both pan & tilt, it also has a variable speed control. It can to pan 340 degrees and tilt up or down 15 degrees. We also supply a tilt correction plate which will allow the camera to tilt down 30 degrees from a level position, which is useful when the stand is being used for high shots.
The pan speed is variable between 4 to 8 degrees per second and the tilt is variable between 1.2 to 2.4 degrees per second ( speeds are approximate ). The Power Head is powered by 4 AA batteries. Size 145x115x103mm (5.75x4.5x4 inches)

Hähnel Inspire LiveView Remote Control
Ideal for aerial photography, the Inspire features a built-in, 3.5” colour LCD on the hand-held transmitter that displays a LiveView image independent of DSLR. You can then view these images from up to 60m away, ensuring that you take the perfect photo at exactly the right time.

Features:
* 3.5” LCD displays LiveView image of the Camera. * Built-in camera gives LiveView image even for those DSLR’s without this feature. * Easily switch between DSLR LiveView & built-in CMOS camera view. * Playback the pictures taken without having to go back to the camera. * Control several cameras with one Inspire. * Several Power options for every situation. * Available for Canon & Nikon DSLR’s

Inspire Wireless LiveView Remote Control for Canon DSLR
Camera - EOS 1000D/550D/500D/450D/400D/350D/300D/60D/50D EOS 40D/30D/20D/20Ds/10D/7D/5D/5D Mark II/1D/1Ds Mark II/III / IV. Rebel T1i / T2i. Powershot G10 / G11 / G12
Pentax K-5/K-7/K10/K20/K100/K200 / Samsung GX10 / GX20

Inspire Wireless LiveView Remote Control for Nikon DSLR
Camera - D7000/D5000/D5100/D3100/D700/D300/D300s/D200. D100 (only with MB-D100 grip attached). D90/D80/D70s/D3s / D3/D3x/D2X/D2Xs/D2H/D2Hs. D1/D1X/D1H




Price: £605.00 (£726.00 Including VAT at 20%)